Category Archives: Artisans & Skills Training

Artisan Learnerships for People with Grade 10 , 11 And 12

Artisan Learnerships for People with Grade 10 , 11 And 12

Our Learnership Programme affords the incumbent the opportunity to grow within AFGRI under the mentorship of our leaders, in formal training as well as on the job development rotations in multidisciplinary teams.


The application window period opens on 1 September and closes on 31 October of each year.


  • Grade 10 / NQF 2
  • Grade 11 / NQF 3
  • Grade 12 / NQF 4
  • Higher Certificate / NQF 5
  • Numeracy and literacy skills

Programme will include the following

  • Practical and theoretical modules carried out over a 12-month period
  • Awarding of a 12-month programme certificate, upon successful completion

How to Apply

Application Process

Our intake period is from January to August year on year, learners must avail themselves for interviews and assessment process as defined by the company.


Public Works Construction Learnership X 188 learners wanted

The Department of Transport and Public Works invites South Africans interested in careers in construction to apply for new Learnerships available now.

The Department of Transport and Public Works invites South Africans interested in careers in the following construction fields to apply for these exciting training opportunities:


Masonry (bricklaying) 


Electrical wiring

Hot water installation

Lift installation


The Learnership Training in the Construction Industry initiative forms part of our National Youth Service (NYS) Programme. NYS gives the following groups the chance to develop the necessary skills:

Unemployed youth in the technical trade industry with no work experience, and

people working in the technical trade industry with work experience but no trade certification.

How to Apply

Minimum requirements to apply for a learnership
Applicants must be between the ages of 18 and 34 years.

Please read the requirements for specific learnerships in each advert before applying


Closing Date: Friday, October 25, 2019


Saj Competency Training Institute Pty Ltd



Universal plastics in Pretoria is currently looking for Semi Skilled candidates.

Trades wanted are Millwright, Electrical, Fitter and Turner, Diesel Mech and Boilermaking.

Please send or forward Cvs to

Thank you



2.Hi Artisans Serioplast South Africa is looking for a QUALIFIED MILLWRIGHT.


I repeat If you are a qualified Millwright please send your cv to

candidates please DO NOT send your CVs to SAJ,

Serioplast is located @ Corner Dormehl St. and Davidson
1459 Boksburg Gauteng – South Africa

Sibanye-Stillwater Mining Experiential Internship

Sibanye-Stillwater Mining Graduate Opportunity

Sibanye-Stillwater Mining Graduate Opportunity

Closing Date 15 October 2019

Sibanye-Stillwater is offering Internship programmes to community members who have obtained a tertiary qualification. A LIMITED NUMBER OF INTERNSHIP PROGRAMMES ARE BEING OFFERED TO CANDIDATES FOR A FIXED-TERM PROGRAMME IN LINE WITH SIBANYE-STILLWATER’S BUSINESS NEEDS, TO INDIVIDUALS WHO HAVE OBTAINED. Beneficiaries of the Internship programme will receive a 1½  year fixed-term employment contract to obtain post-graduate experience. Intern 18.2 Graduate Mining

Job no: 494849
Work type: Fixed Term
Categories: Engineering
Grade: NG

Pre-screening and psychometric evaluation may form part of the selection process. Shortlisted candidates will be requested to attend panel interview. Applicants who receive no response to their applications within 21 days may consider their application for the position to be unsuccessful.

Sibanye Stillwater is committed to the achievement and maintenance of adversity and equity in employment



  • NDip / BSc /  BTech / BIng Mining Engineering


  • Be in possession of a relevant qualification when applying for an Internship programme

What must you submit when applying

  • Detailed Curriculum Vitae
  • SAPS Certified Copies of ID and relevant qualifications
  • Complete Academic Record
  • Proof of Residence (fraudulent submissions will be excluded from applications)
  • By submitting your CV, applicants are consenting to the Company’s assessment and interview process
  • Be declared medically fit for the position and environment, as determined by a risk-based medical examination at the relevant Sibanye-Stillwater Occupational Health Care Centre
  • Applications to be done online –
  • No manual applications will be accepted by the HR or Recruitment personnel

Preference will be given to:

  • Applicants from local communities and labour sending areas

Website                                     :

HR Contact Person                     : Esme Atherstone

Recruitment Person                    : Lyllian Ndlovu

Recruiter`s Contact Person          : 014 495 2580


NB: Kindly note that Programme duration dependent on discipline specifics.

Advertised: 15 Aug 2019 South Africa Standard Time
Applications close: 15 Oct 2019 South Africa Standard Time



South African Police Services Is Looking For Artisans

LOCATION: Division: Technology Management Services: (Eastern Cape –Mount Road ICTU)

Generic Requirements:
 Applicants must display competency in the post-specific functions of the post;
 Be in possession of a Senior Certificate (Grade 12),
 Be a SA Citizen,
 Be fluent in at least two official languages, of which one must be English;
 Be in possession of a valid light motor vehicle driver’s licence. Must have no visible tattoo/s when wearing summer uniform.
 Must have no previous convictions or pending criminal/ departmental cases pending.
 Applicants will be subjected to a vetting process which will include security screening and fingerprint verification.
 Organizational skills. Computer literacy (MS Word, MS PowerPoint and MS Excel) will serve as an advantage.
Additional Requirements:
 An NQF 6 in Electrical Engineering or NQF 4 certificate or equivalent with minimum 2 years’ experience in the field of post or National Technical Certificate level 3 (N3) in the field of Electrical Engineering light current / telecommunications (Electronics) with minimum 2 years’ experience in the field of post or NQF 3 certificate with a minimum 5 years’ experience in the field of the post.
 Having successfully completed the following courses Radio Installation, Frequency Modulation Principles and Basic Electronics (applicable to all applicants except applicants with NQF 6 in Electrical Engineering).
 Must be willing to work with heights.
 Trade Test in the field of the post and/or certificate in fall arrest / rope rigging will be an added advantage.
Core Functions:
 To conduct repairs, installation, removals and maintenance of radio equipment for the SAPS Radio Technical Unit.
 To do radio infrastructure installations at SAPS Radio High Sites.
 To conduct preventative maintenance at SAPS Radio High Sites.
 To work and perform operating test equipment (Communication Monitor, Signal Generator, Oscilloscope).
 To analyse and trace radio infrastructure faults.

•Only the official application form (newly developed form is available from all police station, on the SAPS website and at the SAPS Recruitment offices) will be accepted. All instructions on the application form must be adhered to and previous criminal convictions must be declared; failure to do so may result in the rejection of the application. The post particulars and reference number of the post must be correctly specified on the application form.
•Persons who retired from the Public Service by taking a severance package, early retirement or for medical reasons, as well as persons with previous convictions, are excluded.
•Comprehensive Curriculum Vitae must be submitted together with the application form.
•Certified copies of an applicant ID document, valid motor vehicle driver’s license and all educational qualification obtained must submitted together with the application form
•Applicants are requested to initial each and every page of the application form, CV and all annexures.
•Through the filling of the above mentioned posts, an applicant whose appointment will promote representivity
may receive preference. If a candidate is short-listed, it can be expected of him/her
to undergo a personal interview which may include practical test or presentation.
•The South African Police Service will verify the residential address and qualification of applicants, as well as
citizenship. Reference checking will be conducted on all short listed applicants.
•Applications must be mailed in time, as late applications will not be accepted. No faxed or e-mailed
applications will be accepted.
•If you have not been contacted within 3 months after the closing date of this advertisement, please accept
that your application was unsuccessful.
•The South African Police Service is under no obligation to fill the post after the advertisement therefore.
•The South African Police Service is an equal opportunity, affirmative action employer and it is the intention to
promote representivity in the Public Service through the filling of these posts.
•People with disabilities are welcome to apply.
•Correspondence will be conducted with successful applicants only.
•Recommended candidates will be subjected to fingerprint screening.
•Short-listed candidates will be subjected to security clearance.
•Closing date for applications is 30 September 2019.
•Late applications will not be considered.
•Appointments will be made in terms of the Police Service Act as applicable to the post environment.
•The Division is under no obligation to fill a post after the advertisement thereof. Although the post is
advertised, the National Commissioner may withdraw the post from the advertisement,
re-advertise the post or fill the post by transferring a person at the same level where is deemed to be in the
interest of service delivery.

Applications and enquiries can be directed to:
Lt Col MS Matsomane
Capt G Xoko
Tel: 012 432 7194/ 012 432 7709
Applications can be forwarded (for attention Lt Col MS Matsomane) to:
Postal Address
Division: Technology Management Services
South African Police Service
Private Bag X 22
Hand Delivery
Office No. PPS 138/143
Tulbach Park Building
Cnr. Stanza Bopape (Church) and Jan Shoba (Duncan) Streets







TVET College Learnership Opportunity

Vhembe TVET College Learnership and Short Skills Programme

Vhembe TVET College hereby invites all first time learners below 35 years in vocational skills to participate in the Short Skills and Learnership programme

Learning Programmes indicated below:

Short skills programme

  • Bricklaying X25
  • Carpenter X25
  • Painter X25
  • Plumber X25
  • Electrical X25

Learnership Programme

  • End User X19
  • Electricity X19
  • Carpentry X19
  • Plumbing X18

Opportunity Closing Date: 

Friday, July 5, 2019

To know more information click the link below


Closing date: 05 July 2019 before 14H30

Engineering Apprentice Electrical , Fitter And Millwright At I&J

Engineering Apprentice Electrical / Fitter / Millwright

An opportunity exists for an Electrical Apprentice at I&J Cape Town Fishing. I&J want to attract a passionate, customer centric and process driven individual who has strong communication skills to become part of the Engineering Team. We seek an individual who is passionate about engineering, specific to the Electrical discipline.


Communicate Clearly – Ensures a common understanding of the message is established between the sender and the recipient and that the intended impact or result is achieved
Build and use key relationships – Quickly identifies and establishes key relationships in the business
Remain composed and resilient – Perseveres and overcomes obstacles despite resistance or setbacks.
Work with others – Is receptive to feedback from others as well as providing meaningful feedback to others


Minimum Grade 12/NQF4 equivalent

How To Apply

Apply Online for the I&J Apprenticeship Programme

Closing Date: 05 July 2019
Location: Cape Town

Anglo American Learnership

Closing Date: 12 July 2019
Ref: S730259

Interested? You will need a minimum qualification as indicated (a certificate or statement of results if certificate is not issued progress reports will not be accepted) is not yet the following subjects.

Applications accepted throughout South Africa. 

  • Millwright Minimum requirement N2 with subject Mathematics, Engineering Science, Industrial Electronics, Electrical Trade Theory & Fitting and Machine Trade Theory
  • Plater Welder: Minimum requirement N2 with subjects Mathematics Engineering Science, Plating and Structural Steel Drawings and Platers Theory 
  • Transportation Electrician: Minimum requirement N2 with subjects Mathematics, Engineering Science, Auto Electrical Trade Theory & Industrial Electronics

Only Northern Cape residents to apply 

  • Fitter: Minimum requirement N2 with subjects, Mathematics Engineering Science Fiting, and Machining Trade Theory and Engineering Drawings
  • Diesel Mechanic Minimum requirement N2 with subjects Mathematics Engineering Science, Diesel Trade Theory and Engineering Drawings

Additional Information: You must pass an aptitude test interview as well as a medical assessment before the learnership will commence

Learnership include: Stipend / allowance per month, learnership agreement, subsidised accommodation and meals (only for students outside Kathu), artisan trade related toolbox (will become the property of the artisan learner after the successful completion of the trade test),free PPE, free training.

Training programmes 1st year of the job institutional training at Sivas, Technical Training Centre, 2nd year on the job/core training at Sishen mine, 3rd year: Complete trade test

Preference will be given to applicants from these municipales Joe Morong Local Municipality Gasegonyana Local Municipality and Gamagara Local Municipality

How To Apply

Only apply for the above positions if you comply with the requirements by posting the following documents:

Updated, complete CV, (including race, gender, contact numbers and email address), original certified copy of ID, certified copy of drivers licence (optional), certified copy of highest school grade passed, certified copy of N-qualification.

Post your application to the Admin Office, SIVOS, Private Bag x506, Kathu, 8446. No faxed or scanned documents will be accepted.

Enquiries: Tel, 053 739 3300 / 2570 / 3982 / 1777 during office hours

Appointments will be made in line with SLP targets

Communication will be with shortlisted candidates only. All applicants are thanked for their interest.

In-Service Training At Glencore

Location: Waterval East Mine, North West
Ref. No. TSS04 / 04 / 2019
Mining Engineering
Electrical Engineering
Mechanical Engineering
Human Resources Development
These practical internships provide work experience to students studying towards or who have completed qualifications in the above faculties. The Programme is composed of practical work exposure Pl for 6 months and P2 for 6 months. The Company, as a host will provide students with practical workplace exposure and projects, which will be submitted to the Institute where projects will be marked and the student awarded with qualification, The practical internship also requires the student to enter into a tripartite agreement between the student, host company and the MOA
Studying towards a diploma in the relevant field.
Completed S1-S4 for practical training P2 requirements
Medically fit
Good knowledge of the HSEC System
Good interpersonal and communication skills. Computer literate in Microsoft packages.
How to Apply
Please forward applications to e-mail:
By submitting your CV to Glencore, you hereby give us permission to circulate your information to the interview panel members for this vacancy only. Your information will not be used for any other position/purpose and will be disregarded after an offer has been made. In the event that you do not hear from the Company within a period of 21 days after the closing date of applications your application should be deemed to be unsuccessful. The CVs of unsuccessful candidates will not be returned

Learnership At PPC Cement

The ideal candidate must be in possession of N2 in:
Fitter & Turner
Engineering Science
Engineering Drawings
Fitter & Turner Trade Theory
Engineering Science
Plating & Structural Drawings
Plating & Structural Theory
Engineering Science
Industrial Electronics
Electro Trade Theory
Diesel Mechanic
Engineering Science
Engineering Drawings
Diesel Trade Theory
Fit and able to pass a medical examination.
Must be positive and dedicated to his/her Trade.
Candidate must be willing to relocate to PPC De Hoek, Piketberg, where accommodation will be available on site
The best training at our De Hoek Factory & at our Technical School Academy situated close to Mafeking in the North West Province.
Learners salaries as prescribed by the MQA.
Travelling expenses to and from the Training School Academy paid by the Company.
How to Apply
If you meet our requirements, please submit a CV, with a cover letter clearly stating for which learnership you apply and accompanied with certified copies of qualifications and an ID to Lorraine Lourens, PPC De Hoek, P.O. Box 10311, De Hoek, 7321 or email: